Exhaust Gas Recirculation (EGR) Tube Replacement

-

What is the Exhaust Gas Recirculation (EGR) Tube all about?

The EGR (Exhaust Gas Recirculation) valve helps lower the car’s exhaust emissions (gases from the tailpipe). It recirculates a portion of the gasses coming out of the engine by putting them back into the intake manifold, where the engine can burn them again, reducing emissions.
Most engines require exhaust gas recirculation to meet emissions standards. If the EGR valve has gone bad, the car will most likely not pass an emissions test.Image result for exhaust gas recirculation
Image result for exhaust gas recirculation

Keep in mind:

During the EGR valve replacement, your mechanic should also inspect the vacuum hoses connected to the EGR valve. If the vacuum hoses are cracked (leaking), EGR valve will not function properly.

How it's done:

  • Scan the computer system in the car.
  • Check all vacuum related hoses to EGR valve.
  • Test EGR transducer.
  • Verify the EGR port is not clogged.
  • Remove and replace the EGR valve and gasket.
  • Clear the trouble codes and test for proper operation of EGR valve.

My recommendation:

It is a good idea to get an air induction (carbon cleaning) service performed every 50,000 miles. This should clean out any sludge or carbon build-up in the air intake system. Always keep up with the regular oil changes; it will help prevent sludge build-up in the engine.

What common symptoms indicate you may need to replace the Exhaust Gas Recirculation (EGR) Tube?

  • Check Engine light is on.
  • Engine rattles during acceleration.
  • Engine has trouble idling.

How important is this service?

Your engine is not as efficient as it can be, which is why you have an EGR valve. The EGR valve takes a portion of the gas that your engine is excreting, and recirculates it through the intake manifold. The intake manifold then sends the gas back to the engine, where it is used again to power your vehicle. The tube is a key part of the EGR valve, and when the tube fails, the EGR valve will fail to do its job. As a result, your vehicle will not recirculate or recycle any of the excess gas from the engine, and you will get worse fuel mileage and possibly fail emissions standards.

Comments

Post a Comment

Popular posts from this blog

Basic components of the engines.

-
Image
Engine   is a device that produces power. It is made by various parts bolted together and they work together to achieve power by burning of fuel. These parts are given below: 1. Cylinder Block: Cylinder block or Cylinder are main part of an engine. It is a part in which combustion of fuel takes place. All other parts like piston, connecting rod, crankshaft, water jacket etc. are bolted on it. 2. Piston: Piston is placed in the cylinder and transmits thrust to the connecting rod. It is free to move. It compresses the air fuel mixture and convert the fuel energy into mechanical energy. It transmits the power to the crankshaft. 3. Cylinder Head: Cylinder head is fitted on the top of cylinder block and the function of the cylinder head is to seal the working end of cylinder and not to permit entry and exit of gases on cover head valves of the engine. The valves, spark plug, camshaft etc are fitted on it. 4. Connecting Rod: It connect piston to t
Read more

Hyundai KAPPA Engine

-
Image
Hyundai' s    Kappa   automobile  engine series consists of  3 cylinder  and  4 cylinder  models. [2] Kappa 1 1.2 L The 1.2 litre variant is gasoline powered, all-aluminum, and utilizes a  DOHC  16-valve design, as opposed to the  SOHC  12-valve design of its predecessor, the  Hyundai Epsilon Engine   76 hp (57 kW; 77 PS) at 5,200 rpm and 82 lb · ft (111 N · m) of torque at 4,000 rpm. 1.25 L The 1.25 litre is the European version displacing 1248 cc. It makes 79 hp (59 kW; 80 PS) at 5,200 rpm and 87 lb · ft (118 N · m) of torque at 4,000 rpm. Actual output figures may slightly vary from market to market. Fuel economy is rated at 5.0L/100 km (47 mpg) in the European combined test cycle. Kappa II Main improvement is adding VVT (Variable Valve timing) to the engine. 1.0 L The 1.0 litre three-cylinder engine makes 68 hp (51 kW; 69 PS) at 6,200 rpm and 70 lb · ft (95 N · m) of torque at 3,500 rpm. 1.25 L Hyundai engineers have taken the existing 1.25L 4-cylind
Read more

Top 10 Vehicle Safety Devices

-
Image
Sometimes, we wonder if technology is hurting more than helping us, and in some cases, it may be. One way that today?s technology is really helping us is by providing us with many more devices in our vehicles to keep us safe. Throughout the history of motor vehicles, there have been some significant changes. For instance, in the beginning, vehicles didn?t even have seatbelts or windshield wipers. We?ve come a long way since Henry Ford first started rolling cars off the assembly line. Today?s automobiles have all kinds of wonderful features designed to keep you and your loved ones safe. Here are 10 of the top vehicle safety devices you need to be aware of, especially when purchasing a new vehicle: 1 Airbags Some people think that these are actually dangerous, but they have in fact saved many, many lives. There are two main types of air bags, dual stage airbags and side airbags. If needed, the dual stage airbags will go off at different times, one in a minor accident and b
Read more