Air Bleed Housing Assembly

-

Image result for air bleeding assembly for coolant line

What is the Air Bleed Housing Assembly all about?

Coolant is essential to engine operation throughout the year. It carries away heat that would otherwise kill the engine during operation, but it also protects against freezing during winter – normal water can freeze solid inside an engine, causing immense damage from expansion. However, coolant degrades over time and must be changed. Changing the coolant allows air into the system, which must be removed in order for the engine to operate correctly. Air in the coolant lines can cause many problems, including overheating and severe engine damage.
The air bleed housing assembly, or air bleeder housing assembly if you prefer, is a simple setup generally found near the back of the engine that allows you to combat this problem. It is usually the highest point on the cooling system. It’s nothing more than a small housing with a bleeder nut attached. By opening the valve while the engine is running after a coolant change, air escapes out of the system and prevents overheating.

Keep in mind:

  • The air bleed housing assembly is not inspected during normal maintenance but should be inspected during any coolant system service.
  • The air bleed housing assembly is made of metal, and running straight water in your system can cause problems including rust and corrosion that will require the assembly to be replaced.

How it's done:

  • The air bleed housing assembly is verified to see if it needs to be replaced
  • The defective air bleed housing assembly is removed
  • The new air bleed housing assembly is installed
  • The air bleed housing assembly is tested for operation and leaks
  • The vehicle is tested to ensure proper operation of the air bleed housing assembly 

What common symptoms indicate you may need to replace the Air Bleed Housing Assembly?

  • Bleeder valve will not open
  • Bleeder valve or assembly is damaged in some way that compromises operation
  • The housing is leaking coolant.

How important is this service?

While the air bleed housing assembly isn’t critical to normal operation, it’s a crucial part of your engine coolant system. If the bleeder valve is damaged, or the assembly is corroded, I recommend replacing it as soon as possible. It will not prevent you from driving your car, but it can cause serious issues after a coolant change.

Comments

Post a Comment

Popular posts from this blog

Basic components of the engines.

-
Image
Engine   is a device that produces power. It is made by various parts bolted together and they work together to achieve power by burning of fuel. These parts are given below: 1. Cylinder Block: Cylinder block or Cylinder are main part of an engine. It is a part in which combustion of fuel takes place. All other parts like piston, connecting rod, crankshaft, water jacket etc. are bolted on it. 2. Piston: Piston is placed in the cylinder and transmits thrust to the connecting rod. It is free to move. It compresses the air fuel mixture and convert the fuel energy into mechanical energy. It transmits the power to the crankshaft. 3. Cylinder Head: Cylinder head is fitted on the top of cylinder block and the function of the cylinder head is to seal the working end of cylinder and not to permit entry and exit of gases on cover head valves of the engine. The valves, spark plug, camshaft etc are fitted on it. 4. Connecting Rod: It connect piston to t
Read more

Hyundai KAPPA Engine

-
Image
Hyundai' s    Kappa   automobile  engine series consists of  3 cylinder  and  4 cylinder  models. [2] Kappa 1 1.2 L The 1.2 litre variant is gasoline powered, all-aluminum, and utilizes a  DOHC  16-valve design, as opposed to the  SOHC  12-valve design of its predecessor, the  Hyundai Epsilon Engine   76 hp (57 kW; 77 PS) at 5,200 rpm and 82 lb · ft (111 N · m) of torque at 4,000 rpm. 1.25 L The 1.25 litre is the European version displacing 1248 cc. It makes 79 hp (59 kW; 80 PS) at 5,200 rpm and 87 lb · ft (118 N · m) of torque at 4,000 rpm. Actual output figures may slightly vary from market to market. Fuel economy is rated at 5.0L/100 km (47 mpg) in the European combined test cycle. Kappa II Main improvement is adding VVT (Variable Valve timing) to the engine. 1.0 L The 1.0 litre three-cylinder engine makes 68 hp (51 kW; 69 PS) at 6,200 rpm and 70 lb · ft (95 N · m) of torque at 3,500 rpm. 1.25 L Hyundai engineers have taken the existing 1.25L 4-cylind
Read more

Top 10 Vehicle Safety Devices

-
Image
Sometimes, we wonder if technology is hurting more than helping us, and in some cases, it may be. One way that today?s technology is really helping us is by providing us with many more devices in our vehicles to keep us safe. Throughout the history of motor vehicles, there have been some significant changes. For instance, in the beginning, vehicles didn?t even have seatbelts or windshield wipers. We?ve come a long way since Henry Ford first started rolling cars off the assembly line. Today?s automobiles have all kinds of wonderful features designed to keep you and your loved ones safe. Here are 10 of the top vehicle safety devices you need to be aware of, especially when purchasing a new vehicle: 1 Airbags Some people think that these are actually dangerous, but they have in fact saved many, many lives. There are two main types of air bags, dual stage airbags and side airbags. If needed, the dual stage airbags will go off at different times, one in a minor accident and b
Read more